Name: FD300 high performance vector inverter
Brand: GETM
Availability: InStock
Rating: 4.7 (48 reviews)

FD300 high performance vector inverter

Product Profile & Features

FD300 high performance vector inverter
High performance vector control VFD
01 Compact structure,
02 Environmental adaptability
Wide voltage range design
Rated voltage: 380 - 480 V
Rated frequency: 50 / 60Hz
Allowable voltage fluctuation range: 320 - 528 V
Unbalance: ＜ 3%
Frequency range: 47 - 63Hz
Independent air duct design
Completely independent air duct, truly realizing "driver and control" isolation.
03 performance introduction
Performance improvement
Advanced motor drive technology can realize high-efficiency operation of synchronous and asynchronous motors
Rich motor auto-tune methods
The efficient and fast motor parameter identification algorithm supports a variety of auto-tune methods, and the dynamic and static tuning is accurate and consistent, without manual adjustment, so as to give full play to the driving performance
Reliable braking performance
Integrating DC, magnetic flux, short circuit and other braking modes, it can realize safe and fast stopping of large inertia load
Flying starting
The software automatically searches the speed and direction of the motor, which can realize the smooth and shock free starting of the motor at any speed
Stable low frequency high torque performance
Under the closed-loop vector mode, the low-frequency torque is large and the torque ripple is small, which can realize the stable load operation of very low speed 0.01Hz, and the torque and speed modes can be switched smoothly online
Excellent motor control algorithm
Reliable torque limit
Bus voltage stability control
No stop upon instantaneous power-off.
Dynamic braking
DC braking
Flux braking
Short circuit braking
Integrated synchronous and asynchronous motor control
It can drive all kinds of motors: direct drive motor, permanent magnet synchronous motor, motorized spindle, asynchronous servo motor, ordinary asynchronous motor, variable frequency motor, servo motor, etc.
Speed control
Torque control
VF control
VIF control
Open loop vector control
Closed loop vector control
Asynchronous motor
Asynchronous servo motor
Position controlled synchronous motor
Motorized spindle
Direct drive motor

Synchronous and asynchronous drive integration, open-loop and closed-loop comprehensiveness, excellent motor driving performance
Current waveform of synchronous motor under open-loop vector control mode 300Hz with 100% rated load

Safe and perfect protection function: it provides multiple protections such as short circuit, overvoltage, overcurrent, overload and overheating

Overvoltage stall
In the process of deceleration, the output frequency is adjusted to avoid excessive power generation of the motor caused by too fast deceleration, resulting in overvoltage of the DC bus of the frequency converter.

Overcurrent stall
In the process of acceleration, the output frequency is adjusted to avoid excessive load caused by too fast acceleration, resulting in overcurrent of the frequency converter.

04 Rich extended functions
Strengthen the expansion performance and meet the needs of a variety of applications at the same time
(1) Optional I / O card, CAN open communication card, PROFIBUS DP communication card, isolated 485 communication card and various types of PG cards can meet the needs of various expansion cards at the same time and quickly meet the personalized needs of customers
(2) It supports various encoder interfaces such as differential, rotary transformer and collector signal, and can realize high-precision closed-loop vector control
(3) Simple and fashionable segment code screen keyboard design makes debugging more smooth and convenient

05 Multi-functions
Support various industrial communication protocols and be compatible with various industrial control systems

RS485 communication is configured as standard and supported by expansion card: Ethernet, CANopen, can, PROFIBUS DP and PROFINET

PG card adopts digital filtering technology to improve electromagnetic compatibility and realize long-distance stable reception of encoder signals. Compared with traditional schemes, the anti-interference performance is doubled

Support pulse setting and frequency division output; It has the function of quick detection of encoder disconnection to avoid the expansion of the influence of system failure

Encoder signal when 100m motor line is coupled in near field

Two channels of HDI are equipped as standard, which can be used as speed source and support high-speed AB pulse input signal to form a simple closed-loop application and provide customers with a cost-effective closed-loop application scheme

High speed pulse simple closed loop
maximum support for 110KW built-in braking unit, saving cost and installation space for customers
Note:
37KW and below products support standard built-in braking unit, and 45 ~ 110KW products support optional built-in braking unit

General products:FD300 series
380 volt level products standard equipped with C3 filter, and optional C2 filter.
In order to meet different application requirements in various places, 380 volt class product is equipped with built-in C3 input filter as standard and assembled before leaving the factory, so as to save external installation space and avoid electromagnetic interference caused by improper selection and on-site installation caused by the use of external filter.

Remarks:
C2 filter: EMC performance of the VFD achieves the limited usage requirement in civil environment.
C3 filter: EMC performance of the VFD achieves the limited usage requirement in industrial environment.

Rich external interfaces to meet most of the application

Terminals	Quantity	Specification
Digital input	4 channels	Programmable multifunctional terminal Maximum input frequency: 1kHz Compatible with NPN and PNP inputs
High speed pulse input	2 channels	Maximum input frequency: 50KHz Compatible with NPN and PNP inputs It supports orthogonal encoder input and has speed measurement function
Analog input	2 channels	0~10V,0~20mA, -10V~+10V
Digital output	1 channel	Max. output frequentcy:1KHz
High speed pulse output	1 channel	Max. output frequency:50KHz
Analog output	2 channels	0~10V,0~20mA
Relay output	2 channels	3A/250VAC, 1A/30VDC, NO+NC

06 Safe and reliable
Vibration test bench
High and low temperature test chamber
Low pressure test chamber

Experiment type	Experiment name	Classification
Mechanical reliability experiments	Package experiments	Package compression experiments
		Package resonance imaging and storage test
		Package random vibration test
		Package dropping test
		Package rolling test
		Package dumping test
		Package inclined impact test
	Impact test	Half-sine wave impulse test(non-working state)
		Trapezoidal wave impulse test (non-working state)
	Vibration test	Sinusoidal vibration test (working state)
		Random vibration test (working and non-working state)
Climatic environmental reliability test	Temperature experiment	Low temperature storage test
		High temperature storage test
		Low temperature experiments
		High temperature experiments
		Temperature gradient experiments
		Temperature impact test
	Thermal test	Constant thermal test
		Alternation thermal test
	Salt spray test	Constant salt spray test
		Alternation salt spray test
	Low air pressure test	Low Air Pressure Test
		Low temperature and low pressure test
		High temperature and low pressure test

Model No. Description

Table 1 Rated specifications

Model no.	Output power (kW)	Input current(A)	Output current(A)	Carrier frequency(kHz)	Remark
FD300-0R7G/1R5P-4	0.75	3.4	2.5	1～15(8/4)
FD300-1R5G/2R2P-4	1.5	5.0	4.2	1～15(8/4)
FD300-2R2G/003P-4	2.2	5.8	5.5	1～15(8/4)
FD300-004G/5R5P-4	4	13.5	9.5	1～15(8/4)
FD300-5R5G/7R5P-4	5.5	17	14	1～15(8/4)
FD300-7R5G/011P-4	7.5	25	18.5	1～15(8/4)
FD300-011G/015P-4	11	32	25	1～15(8/4)
FD300-015G/018P-4	15	40	32	1～15(4/2)
FD300-018G/022P-4	18	47	38	1～15(4/2)
FD300-022G/030P-4	22	51	45	1～15(4/2)
FD300-030G/037P-4	30	57	60	1～15(4/2)	Optional DC reactor
FD300-037G/045P-4	37	69	75	1～15(4/2)
FD300-045G/055P-4	45	89	91	1～15(4/2)
FD300-055G/075P-4	55	110	115	1～15(4/2)
FD300-075G/090P-4	075	140	150	1～15(2/1.5)
FD300-090G/110P-4	90	165	180	1～15(2/1.5)
FD300-110G/132P-4	110	200	215	1～15(2/1.5)
FD300-132G/160P-4	132	250	260	1～15(2/1.5)
FD300-160G/185P-4	160	290	315	1～15(2/1.5)
FD300-185G/200P-4	185	320	340	1～15(2/1.5)	Optional DC reactor
FD300-200G/220P-4	200	365	380	1～15(2/1.5)
FD300-220G/250P-4	220	410	425	1～15(2/1.5)
FD300-250G/280P-4	250	445	470	1～15(2/1.5)
FD300-280G/315P-4	280	500	530	1～15(2/1.5)
FD300-315G/355P-4	315	580	600	1～15(2/1.5)
FD300-355G/400P-4	355	620	650	1～15(2/1.5)	Standard DC reactor
FD300-400G/450P-4	400	690	725	1～15(2/1.5)
FD300-450G/500P-4	450	785	820	1～15(2/1.5)
FD300-500G/630P-4	500	825	860	1～15(2/1.5)
FD300-630G/710P-4	630	1050	1100	1～15(2/1.5)

Product specifications

Function		Specification
Power input	Input voltage (V)	AC 3PH 380V(-15%)～440V(+10%) Rated voltage: 380V
	Input current (A)	Refer to “Rated specifications)”
	Input frequency (Hz)	50Hz or 60Hz Allowed range: 47~63Hz
Power output	Output voltage (V)	0~input voltage
	Output current (A)	Refer to “Rated specifications”
	Output power (kW)	Refer to “Rated specifications”
	Output frequency (Hz)	0~600Hz(export: 0~400Hz)
Technical control feature	Control mode	Space voltage vector control(SVPWM) Sensorless vector control (SVC) Vector control with sensor feedback (FVC)
	Motor type	Asynchronous motor (AM) and permanent magnetic synchronous motor (SM)
	Adjustable-speed ratio	For AM1: 1:200 (SVC); for SM1, 1:20 (SVC); 1:1000 (FVC)
	Speed control accuracy	± 0.2% (SVC); ± 0.02% (FVC)
	Speed fluctuation	± 0.3% (SVC)
	Torque response	< 20ms (SVC); < 10ms (FVC)
	Torque control accuracy	10% (SVC); 5% (FVC)
	Starting torque	For AMs: 0.25Hz/150% (SVC) For SMs: 2.5Hz/150% (SVC) 0Hz/200% (FVC)
	Overload capability	G type 150% of rated current: 1 minute 180% of rated current: 10 seconds 200% of rated current: 1 second P type 120% of rated current: 1 minute 150% of rated current: 3 seconds 160% of rated current: 1 second
Running control feature	Frequency setting method	Digital setting, analog setting, pulse frequency setting, multi-step speed running setting, simple PLC setting, PID setting, Modbus communication setting, PROFIBUS communication setting. Switch between the combination and single setting channel.
	Auto-adjustment of the voltage	Keep constant voltage automatically when the grid voltage transients
	Fault protection	Provide more than 30 fault protection functions: overcurrent, overvoltage, undervoltage, overheating, phase loss and overload, etc.
	Restart after rotating speed tracking	Smooth starting of the rotating motor
Peripheral interface	Terminal analog input resolution	≤ 20mV
	Terminal switch input resolution	≤ 2ms
	Analog input	1(AI1) 0–10V/0–20mA and 1 (AI2) -10–10V
	Analog output	2 (AO1, AO2) 0–10V /0–20mA
	Digital input	4 common inputs, the Max. frequency: 1kHz, internal impedance: 3.3kΩ; 2 high speed input, the Max. frequency: 100kHz
	Digital output	1 high speed pulse output, the Max. frequency: 100kHz; 1 Y terminal open collector output
	Relay output	2 programmable relay outputs T1A NO, T1B NC, T1C common terminal T2A NO, T2B NC, T2C common terminal Contactor capability: 3A/AC250V,1A/DC30V
	Communication	1 channel RS485
	Extended interfaces	5.5kW and below: two extended interfaces(SLOT1, SLOT2) 7.5kW and above: three extended interfaces: SLOT1, SLOT2, and SLOT3 Supporting PG cards, programmable expansion cards, communication cards, I/O cards and so on
Others	Mountable method	Wall mounting, flange mounting, floor mounting Above 45kW, need optional kit for flange mounting Above 200kW need optional basement for floor mounting
	Temperature of the running environment	-10~50℃, derate above 40℃
	MTBF	2 years (30℃ ambient temperature)
	Protective degree	0.4~185kW IP20 200~630kW IP00; Optional IP20
	Pollution degree	Degree 2
	Altitude	Below 1000m; If it exceeds 1000m, the derating shall be reduced by 1% every 100m, and the maximum altitude shall not exceed 5000m.
	Cooling	Air-cooling
	Braking unit	37kW and below built-in DBU; 45~110kW optional built-in DBU
	EMC filter	Built-in C3 filter: meet the degree requirement of IEC61800-3 C3 Optional filter: meet the degree requirement of IEC61800-3 C2

Dimensions

Size Chassis code	Model no.	Installation			Dimension					Hole size
Size Chassis code	Model no.	A1	A2	B	H	H1	W	W1	D	Hole size
T1	FD300-0R7G/1R5P-4	114		180	190	/	125	/	185	φ5
	FD300-1R5G/2R2P-4
	FD300-2R2G/003P-4
	FD300-004G/5R5P-4
	FD300-5R5G/7R5P-4
T2	FD300-7R5G/011P-4	147		298	310	/	160	/	208	φ6
	FD300-011G/015P-4
	FD300-015G/018P-4
T3	FD300-018G/022P-4	187		333	345	/	200	/	208	φ6
T3	FD300-022G/030P-4
T4	FD300-030G/037P-4	227		378	390	/	240	/	222	φ6
T4	FD300-037G/045P-4
T5	FD300-045G/055P-4	180		540	515	555	285	/	252	φ9
	FD300-055G/075P-4
	FD300-075G/090P-4
T6	FD300-090G/110P-4	260		535	511	555	340	/	336	φ11
T6	FD300-110G/132P-4
T7	FD300-132G/160P-4	260		800	775	825	340	/	400	φ11
	FD300-160G/185P-4
	FD300-185G/200P-4
Without optional parts
T8	FD300-200G/220P-4	260	170	980	1080	1133	340	/	475	φ11
T8	FD300-220G/250P-4
T9	FD300-250G/280P-4	260	170	1149	1260	1313	340	/	550	φ11
	FD300-280G/315P-4
	FD300-315G/355P-4
T10	FD300-355G/400P-4	260	170	1259	1370	1423	340	/	550	φ11
	FD300-400G/450P-4
	FD300-450G/500P-4
With optional parts
T8	FD300-200G/220P-4	260	170	980	1440	1493	340	422	475	φ11
T8	FD300-220G/250P-4
T9	FD300-250G/280P-4	260	170	1149	1591	1644	340	478	550	φ11
	FD300-280G/315P-4
	FD300-315G/355P-4
T10	FD300-355G/400P-4	260	170	1259	1701	1754	340	478	550	φ11
	FD300-400G/450P-4
	FD300-450G/500P-4

Note:
1.The max power rating of FD300 400 voltage level is 630kW
2.The input current is the actual test result when the input voltage is 380V, and for 30kW and above ratings, the input current is measured with DC reactor configured.
The input current
3.The output current refers to ABB and is defined as 380V rated output current.
4.Under the allowable input voltage range, the output current shall not exceed its limit output current; The output power shall not exceed its rated output power.
5.Inverters 37kW and below built-in DBU standard.
6.Inverters 45~110kW standard without DBU(can be built-in DBU optionally with –B model)

System Performance

Download

Medium-Low voltage Inverter

Product Advantages

Advantages:
Compact structure, easy to form a cabinet which can save space
Advanced motor drive technology for high-efficiency operation of synchronous asynchronous motors
Full frequency speed tracking
Multiple braking methods for fast stopping
Integrates synchronous and asynchronous motor drives
Enhanced expansion performance to meet the needs of multiple applications
Safe and reliable through various tests

FD300 high performance vector inverter

About

Latest Products

Power Conversion System(PCS)-Booster integrated Equipment

FD300 high performance vector inverter

G7 Standard High-voltage Inverter

Contact Us

FD300 high performance vector inverter

Quick Inquiry

FD300 high performance vector inverter

FD300 high performance vector inverter

FD300 high performance vector inverter

A Brand You Can Rely On

Quick Inquiry